ASTM D 3953 PDF

Packaging materials and accessories Annotation of standard text ASTM D : This specification covers flat steel strapping and seals intended for use in closing, reinforcing, bundling articles for shipment, unitizing, palletizing, and bracing for carloading, truckloading, lifting, and lashing. This specification does not include specialty-type strapping as developed for special applications or strapping produced from alloy metals. Strapping shall be of the following types: Type 1 and Type II; shall be of the following finish: Finish A, Finish B including Grade 1, Grade 2, and Grade 3, Finish C and Finish D; and shall have the prescribed widths and thicknesses in accordance with the specified sizes. Materials shall be cold-rolled carbon steel of the prescribed quality. Strapping and seal shall conform to the physical and mechanical property requirements prescribed for: 1 breaking strength, elongation and seal joint strength, 2 lubrication by lubricity and edge tests , 3 weld efficiency, 4 seal width, 5 seal application, 6 notch, crimp, and sealless joints, 7 galvanized strapping by weight loss test , 8 ductility of strapping coating, 9 base metal ductility by bending test , and 10 straightness camber, coil set, and spiral twist.

Author:Dairisar Meztir
Country:Kazakhstan
Language:English (Spanish)
Genre:Medical
Published (Last):25 August 2013
Pages:459
PDF File Size:5.89 Mb
ePub File Size:12.47 Mb
ISBN:184-8-43155-702-5
Downloads:2193
Price:Free* [*Free Regsitration Required]
Uploader:Tezuru



Zulkibar It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. The coil configuration are specified and illustrated.

This specification covers flat steel strapping and seals intended for use in closing, reinforcing, bundling articles for shipment, unitizing, palletizing, and bracing for carloading, truckloading, lifting, and lashing. Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard.

This specification does not include specialty-type strapping as developed for special applications or strapping produced from alloy metals. Work Item s — proposed revisions of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. Strapping shall be of the following types: The coil configuration are specified and illustrated. This abstract is a brief summary of the referenced standard. Strapping and seal shall conform to the physical and mechanical property requirements prescribed for: Strapping and seal shall conform to the physical and mechanical property requirements prescribed for: Class R and Class H; finishes: ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or astn to date.

It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. Historical Version s — view previous versions of standard. Materials shall be cold-rolled carbon steel of the prescribed quality. This specification does not include specialty-type strapping v developed for special applications or strapping produced from alloy metals.

ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are ast, complete or up to date. Type 1 and Type II; shall be of the following finish: Link to Active This link will always route to the current Active version of the standard. It is the responsibility of the user of this standard to establish appropriate safety and axtm practices and determine the applicability of regulatory limitations prior to use.

Related Posts.

GZHA 4150X PDF

ASTM-D3951, ADOPTION NOTICE (21 DEC 1990) [SUPERSEDING MIL-STD-1188A]

More D This specification does not include specialty-type strapping as developed for special applications or strapping produced from alloy metals. Strapping shall be of the following types: Type 1 and Type II; shall be of the following finish: Finish A, Finish B including Grade 1, Grade 2, and Grade 3, Finish C and Finish D; and shall have the prescribed widths and thicknesses in accordance with the specified sizes. Materials shall be cold-rolled carbon steel of the prescribed quality.

S20K275 PDF

Government Grade Steel Strapping

Akinoshicage Link to Active This link will always route to the current Active version of the standard. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ASTM D — January This specification covers flat steel strapping and seals intended for use in closing, reinforcing, bundling articles for shipment, unitizing, palletizing, and bracing for carloading, truckloading, lifting, and qstm. This standard does not purport to address all of the safety concerns, if any, associated with its use. Materials shall be cold-rolled carbon steel of the prescribed quality. This abstract is a brief summary of the referenced standard.

Related Articles